JJG 739-2005 激光干涉仪检定规程
作者:标准资料网 时间:2024-05-20 04:14:21 浏览:8071
来源:标准资料网
基本信息
标准名称: | 激光干涉仪检定规程 |
英文名称: | Verification Regulation of Laser Interferometers |
中标分类: |
综合 >>
计量 >>
长度计量 |
ICS分类: |
计量学和测量、物理现象 >>
长度和角度测量
|
替代情况: | JJG 739-1991 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 |
发布日期: | 2005-10-09 |
实施日期: | 2006-04-09 |
首发日期: | |
作废日期: | |
归口单位: | 全国几何量长度计量技术委员会 |
起草单位: | 中国计量科学研究院 |
起草人: | 许婕、邹玲丁 |
出版社: | 中国计量出版社 |
出版日期: | 2006-04-09 |
页数: | 11页 |
书号: | 155026-2122 |
适用范围
本规程适用于激光干涉仪的首次检定和后续检定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 综合 计量 长度计量 计量学和测量 物理现象 长度和角度测量
【英文标准名称】:Mineralandsapphirewatch-glasses-Part1:Dimensionsandtolerances;TechnicalCorrigendum1
【原文标准名称】:无机和蓝宝石表玻璃.第1部分:尺寸和公差.技术勘误1
【标准号】:ISO14368-1TechnicalCorrigendum1-2006
【标准状态】:现行
【国别】:国际
【发布日期】:2006-01
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC114
【标准类型】:()
【标准水平】:()
【中文主题词】:直径;尺寸公差;尺寸;时计学;无机玻璃;蓝宝石;符号;厚度;时间测量装置;表;表面玻璃
【英文主题词】:Diameter;Dimensionaltolerances;Dimensions;Horology;Mineralglasses;Sapphires;Symbols;Thickness;Timemeasuringdevice;Watches;Watch-glasses
【摘要】:ThisstandardisMineralandsapphirewatch-glasses-Part1:Dimensionsandtolerances;TechnicalCorrigendum1
【中国标准分类号】:Q34
【国际标准分类号】:39_040_10
【页数】:1P.;A4
【正文语种】:英语
MIL-STD-867C, DEPARTMENT OF DEFENSE STANDARD PRACTICE: TEMPER ETCH INSPECTION (25 NOV 2008)., This standard establishes requirements and test for performingtemper etch inspection of carburized steels and tool and low alloy steels, which are heattreated above 1.24 x 109 Pascal (PA) (1.26 x 102 kilogram ?force/square millimeter(Kgf/mm2) or 1.8 x 105 pound ?force/square inch (psi). This standard applies to aircraftand missiles structural and propulsion system components when MIL-HDBK-6870 (forguidance only) and/or MIL-STD-866 are reference documents in the solicitation orcontract.